AstroWiki

User Tools

Site Tools

Trace:
drop_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
drop_setup [2011/05/09 10:06] – leeuwendrop_setup [2013/10/22 14:04] (current) – leeuwen
Line 1: Line 1:
 CMDS CMDS
   * [root] export USER=<username>; useradd ${USER} ; passwd ${USER} ; /usr/sbin/setquota -u ${USER} 20000000 30000000 0 0 /export ; # usermod -G vault ${USER}   * [root] export USER=<username>; useradd ${USER} ; passwd ${USER} ; /usr/sbin/setquota -u ${USER} 20000000 30000000 0 0 /export ; # usermod -G vault ${USER}
 +  * force update using "411" line below / or "rock sync users", but that messes up home dirs
  
 TROUBLESHOOTING TROUBLESHOOTING
Line 6: Line 7:
       * Remove 'old' boot image on master, for this node: **/tftpboot/pxelinux/pxelinux.cfg/C0A800F?** where ? = EDCBA9 for nodes 012345       * Remove 'old' boot image on master, for this node: **/tftpboot/pxelinux/pxelinux.cfg/C0A800F?** where ? = EDCBA9 for nodes 012345
       * Manually reboot node (force PXE boot with F12 if needed)       * Manually reboot node (force PXE boot with F12 if needed)
 +      * Prompts for "language"? Change master root dir permissions: ''chmod a+rx ~root''
   * If network is slow (dmesg | grep eth says "Link is up at 10 Mbps, half duplex") force with ethtool:   * If network is slow (dmesg | grep eth says "Link is up at 10 Mbps, half duplex") force with ethtool:
-      * ''ethtool -s eth1 speed 1000''+      * ''/sbin/ethtool -s eth1 speed 1000'' (if fails, set ''/sbin/ethtool -s eth1 autoneg'' off then on)
       * for eth0 ''ifdown eth0; ifup eth0''       * for eth0 ''ifdown eth0; ifup eth0''
 +  * Keys: [ctrl-ctrl] = bring up display server screen ; [ctrl-alt-f2/f3/f4] = emergy sh, dmesg, etc.
 DONE DONE
   * ROCKS user guide: http://www.rocksclusters.org/roll-documentation/base/5.1/   * ROCKS user guide: http://www.rocksclusters.org/roll-documentation/base/5.1/
Line 45: Line 47:
      * Drive 1 = left, top; Count seems to be 1-3 = left column, top to bottom. RAID0=two lowest in second-to-right colum + entire right column      * Drive 1 = left, top; Count seems to be 1-3 = left column, top to bottom. RAID0=two lowest in second-to-right colum + entire right column
    * CROSSMOUNTS     * CROSSMOUNTS 
-     * removed automounter. changed ''/etc/exports'' and node script to hard mount. Homedirs are /export/home/+     * removed automounter. changed ''/etc/exports'' and node script to hard mount. Homedirs are /export/home/ (make sure this is correct in /etc/passwd)
      * ''make -C /var/411 clean; make -C /var/411; make -C /var/411 force; cluster-fork 411get -''''-all''      * ''make -C /var/411 clean; make -C /var/411; make -C /var/411 force; cluster-fork 411get -''''-all''
      * ''/etc/rc.d/init.d/nfs restart; /etc/rc.d/init.d/nfs restart; make -C /var/411;  service autofs reload;  exportfs -a''      * ''/etc/rc.d/init.d/nfs restart; /etc/rc.d/init.d/nfs restart; make -C /var/411;  service autofs reload;  exportfs -a''
Line 54: Line 56:
      * Read speeds: RAID0 160MB/s, RAID5/local 140MB/s      * Read speeds: RAID0 160MB/s, RAID5/local 140MB/s
      * Increased number of NFS threads from 8 to 32 (link [[http://tldp.org/HOWTO/NFS-HOWTO/performance.html|1]][[https://lists.ubuntu.com/archives/edubuntu-users/2007-September/002213.html|2]])      * Increased number of NFS threads from 8 to 32 (link [[http://tldp.org/HOWTO/NFS-HOWTO/performance.html|1]][[https://lists.ubuntu.com/archives/edubuntu-users/2007-September/002213.html|2]])
 +   * VNC/ETC
 +     * RealVNC server
 +     * FreeNX (yum install nx freenx ; http://wiki.centos.org/HowTos/FreeNX)
    * GRID ENGINE    * GRID ENGINE
      * Some HOWTO links: [[http://biowiki.org/HowToUseSunGridEngine|1]], [[http://gridengine.sunsource.net/howto/howto.htm|2]], [[http://gridengine.info/2008/01/20/understanding-queue-error-state-e| removing state 'E']]      * Some HOWTO links: [[http://biowiki.org/HowToUseSunGridEngine|1]], [[http://gridengine.sunsource.net/howto/howto.htm|2]], [[http://gridengine.info/2008/01/20/understanding-queue-error-state-e| removing state 'E']]
Line 95: Line 100:
    * LIGHTPATH    * LIGHTPATH
      * installed eth2 on c4. edited ''/etc/sysconfig/network-scripts/ifcfg-eth2'' to static ''IPADDR=192.87.39.129'', ''NETMASK=255.255.255.248'', ''MTU=9000''      * installed eth2 on c4. edited ''/etc/sysconfig/network-scripts/ifcfg-eth2'' to static ''IPADDR=192.87.39.129'', ''NETMASK=255.255.255.248'', ''MTU=9000''
-     * On command line, added ''route add 145.100.26.152 gw 192.87.39.130'' for Huygens +     * On command line, added ''/sbin/route add 145.100.26.152 gw 192.87.39.130'' for Huygens 
-     + 
 +2013 BOOT 
 +Running CentOS5.9 now 
 +   Kernel 2.6.18-238.9.1.el5 got beyond RAID wait after 5 minutes. 
 +                 348.18.    Bad IRQ, kernel panic (as was original problem) 
 +                    .16.    Wait=6min, Bad IRQ  
 +                    .12.    Wait=6min, Bad IRQ  
 +                    .6.     Wait=6min, Bad IRQ  
 +(e)dit, remove quiet                      
 + 
 TODO TODO
   * Read OAK topics and redo   * Read OAK topics and redo
  
  
drop_setup.1304935591.txt.gz · Last modified: 2011/05/09 10:06 by leeuwen