public:install_lofar_centos6.5

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
public:install_lofar_centos6.5 [2015-06-26 17:40] – Clarified sections with headings Frank Breitlingpublic:install_lofar_centos6.5 [2017-03-08 15:27] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== Installing LOFAR Software on a CentOS 6.5 (Final) system (cluster Newton of the AIP Potsdam======+====== Installing LOFAR Software on a CentOS 6.5 (Final) System - The Newton Cluster of the AIP Potsdam ======
  
 +This document is evolving and was created by
  --- //[[fbreitling@aip.de|Frank Breitling]] 2015/06/26 18:47//  --- //[[fbreitling@aip.de|Frank Breitling]] 2015/06/26 18:47//
  
  
-I was mainly following the previous installation notes provided by others: \\+A useful starting point were previous installation notes such as: \\
  
 http://www.lofar.org/operations/doku.php?id=public:user_software:lofar \\ http://www.lofar.org/operations/doku.php?id=public:user_software:lofar \\
-http://www.lofar.org/operations/doku.php?id=engineering:user_software:ubuntu_12_4+http://www.lofar.org/operations/doku.php?id=public:user_software:ubuntu_12_4
  
-However a few problems occured and had to be solved as described below. \\+However some additional issues occurred at the Newton cluster and had to be solved as described below. \\
 Ideas and support by **Arno Schoenmakers**, **Ger van Diepen** and **Marcel Loose** were very helpful and highly appreciated. \\ Ideas and support by **Arno Schoenmakers**, **Ger van Diepen** and **Marcel Loose** were very helpful and highly appreciated. \\
-This instruction will install all packages in $HOME/local/. \\ 
  
  
-===== 1. Setup environment ===== +===== 1. Setup of build environment =====
-The 4 Newton head nodes provide some necessary libraries via [[https://en.wikipedia.org/wiki/Environment_Modules_%28software%29|Environment Modules]] (see also http://modules.sourceforge.net/).\\ +
-We need its HDF5 libs and its more recent CMake version 3, since the systems version 2.6 is too old.\\ +
-Moreover, for the installation of Pyrap we need a Python path with write access. \\+
  
-So I added the following two lines to my $HOME/.bashrc:+The following packages are already provided on the cluster: 
 + 
 +  * BLAS 
 +  * LAPACK 
 +  * Boost 1.41.0 (but too old for AOFlagger v2.8.0 and later) 
 +  * cfitsio 3.240 
 +  * HDF5 
 +  * OpenMP 
 + 
 +The cluster also provides a //module system// to load newer versions of the installed software\\ 
 +Its used below to replace the default version of gcc 4.4.7 with gcc 4.8.3 for C++11 support. 
 + 
 + 
 +=== 1.1 Paths === 
 + 
 +The following changes are required: 
 + 
 +  * A more recent version of GCC with C++11 required by Casacore is activated through the module system. This also requires adding /opt/gcc-4.8.3/lib64 to the LD_LIBRARY_PATH since otherwise Pyrap will not find it and complain with
 <file> <file>
-module load cmake hdf5+File "/home/fkbreitl/local/lib64/python2.6/site-packages/python_casacore-2.1.2-py2.6-linux-x86_64.egg/casacore/tables/table.py", line 43, in <module> 
 +    from ._tables import Table 
 +ImportError: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /home/fkbreitl/local/lib/libboost_python.so.1.63.0) 
 +</file> 
 + 
 +  * The packages will be installed in $HOME/local/. \\ 
 +  * Pyrap (python-casacore) needs a writable Python path. \\ 
 + 
 +This adds the following lines to $HOME/.bashrc: 
 +<file> 
 +source /usr/share/Modules/init/sh  # activate module system, needs to be done first 
 +module load gcc/4.8.3  # use gcc 4.8.3 (instead of 4.4.7) for C++11 support 
 +export LD_LIBRARY_PATH=/opt/gcc-4.8.3/lib64:$HOME/local/lib:$LD_LIBRARY_PATH
 export PYTHONPATH=$HOME/local/lib64/python2.6/site-packages:$PYTHONPATH export PYTHONPATH=$HOME/local/lib64/python2.6/site-packages:$PYTHONPATH
 export PATH=$HOME/local:$PATH export PATH=$HOME/local:$PATH
Line 27: Line 53:
  
  
-=== 1.1 Install CMake - only necessary if using newl1 === +=== 1.CMake === 
-Unfortunately CMake is broken on newl1To build the LOFAR software on this head node, we need to build our own CMake as follows:+ 
 +The 4 Newton head nodes provide CMake 2.6 by default, but the LOFAR Software requires at least 2.6.6. A sufficiently recent version of CMake 3.0.0 is provided via [[https://en.wikipedia.org/wiki/Environment_Modules_%28software%29|Environment Modules]] (see also http://modules.sourceforge.net/).\\ 
 +The environment modules also provide more recent HDF5 libraries. Both could be loaded by adding ''module load cmake hdf5'' to $HOME/.bashrc. \\ 
 +But unfortunately the CMake 3.0.0 loaded on the head node newl1 is broken. Furthermore loading the HDF5 libs has no effect on the libs found by CMakewhich are still the system's default. So we don't load any module and don't add this line to the .bashrc. Instead we build our own CMake as follows: 
 <file> <file>
 mkdir -p $HOME/local/src mkdir -p $HOME/local/src
Line 39: Line 69:
 make install make install
 </file> </file>
-If working on the other head nodes newl2 to newl4 this step is not necessary. 
  
  
-===== 2. Install required packages =====+=== 1.3 Python ==
 +To use matplotlib 2 one also needs Python 2.7 or later. 
 + 
 +<file> 
 +V_PY=2.7.13 
 +cd ~/local/src/ 
 +wget https://www.python.org/ftp/python/$V_PY/Python-$V_PY.tgz 
 +tar xf Python-$V_PY.tgz 
 +cd Python-$V_PY 
 +./configure --prefix=$HOME/local --enable-shared                                
 +time make -j 
 +make install 
 +</file> 
 + 
 + 
 + 
 +=== 1.4 Boost === 
 +Also a newer version of [[http://www.boost.org/build/doc/html/bbv2/installation.html | Boost]] is required since AOFlagger v2.8.0 and later: 
 + 
 +<file> 
 +cd $HOME/local/src 
 +V_BOOST=1_63_0 
 +wget wget https://sourceforge.net/projects/boost/files/boost/$V_BOOST/boost_$V_BOOST.tar.bz2 
 +tar xf boost_$V_BOOST.tar.bz2 
 +cd boost_$V_BOOST 
 +./bootstrap.sh 
 +time ./b2 install --prefix=${HOME}/local 
 +</file> 
 + 
 + 
 +===== 2. Installation of dependencies ===== 
 Next we need to build and install these other packages as follows: Next we need to build and install these other packages as follows:
 +
 +=== 2.1 WCSLIB ===
 +The [[http://www.atnf.csiro.au/people/mcalabre/WCS/ | WCSLIB]]:
 +
 <file> <file>
 cd $HOME/local/src/ cd $HOME/local/src/
 wget ftp://ftp.atnf.csiro.au/pub/software/wcslib/wcslib.tar.bz2 wget ftp://ftp.atnf.csiro.au/pub/software/wcslib/wcslib.tar.bz2
 tar xf packages/wcslib.tar.bz2 tar xf packages/wcslib.tar.bz2
-cd wcslib-5.6/+cd wcslib-5.15  # (-5.6)
 ./configure --prefix=$HOME/local/ ./configure --prefix=$HOME/local/
-make install+time make -j install 
 +</file>
  
  
 +=== 2.2 FFTW ===
 +The [[http://www.fftw.org/ | FFTW lib]]:
 +
 +<file>
 +V_FFTW=3.3.5  # 3.3.4
 cd $HOME/local/src/ cd $HOME/local/src/
-wget http://www.fftw.org/fftw-3.3.4.tar.gz +wget http://www.fftw.org/fftw-$V_FFTW.tar.gz 
-cd fftw-3.3.4 +cd fftw-$V_FFTW 
-configure --prefix=$HOME/local --enable-threads --enable-shared --enable-float +./configure --prefix=$HOME/local --enable-threads --enable-shared --enable-float --enable-sse --enable-sse2 --enable-avx 
-make -j12 install+time make -install
 </file> </file>
  
  
-===== 3. Install the LOFAR software ===== 
-Now we can continue building the LOFAR software. \\ 
  
-=== 3.1 Essential CMake switches === +===== 3. Installation the LOFAR software ===== 
-We will need these essential CMake switches:+Now we can build the LOFAR software. \\
  
-   1. -DBoost_NO_BOOST_CMAKE=ON +We will need the following CMake switches:
-   2. -DUSE_LOG4CPLUS=NO +
-   3. -DUSE_BACKTRACE=OFF  +
-   4. -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local+
  
-1.) Is necessary when using some older versions of boost with cmake-2.8.6-rc2 or laterwhere the boost finding has changed. \\ +   1. -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local 
-(See https://stackoverflow.com/questions/9948375/cmake-find-package-succeeds-but-returns-wrong-path.)\\ +   2. -DBOOST_ROOT=$HOME/local/src/boost_1_63_0 
-Otherwise make will show this error later:+   3. -DCMAKE_CXX_FLAGS="-lboost_thread -lboost_filesystem -L$HOME/local/lib" 
 +   # 4. -DBoost_NO_BOOST_CMAKE=YES (not necessary with new installed Boost) 
 + 
 +1.) Sets the installation path to $HOME/local. 
 + 
 +2.) Necessary to find the new Boost installation 
 + 
 +3.) Necessary to link against the new Boost installation 
 + 
 +# 4.) Was required by some older versions of boost e.g. 1.41 with cmake-2.8.6-rc2, producing this problem: \\ 
 +https://stackoverflow.com/questions/9948375/cmake-find-package-succeeds-but-returns-wrong-path resulting in\\
 <file> <file>
 make[2]: *** No rule to make target `/usr/lib64/lib64/libboost_program_options-mt.so.5', needed by `segment' Stop. make[2]: *** No rule to make target `/usr/lib64/lib64/libboost_program_options-mt.so.5', needed by `segment' Stop.
Line 80: Line 155:
 make: *** [all] Error 2 make: *** [all] Error 2
 </file> </file>
 +It is not necessary any more with the new boost installation.
  
-2.) Is necessary if the Log4cplus libs are not installed. 
  
-3.) Is necessary if building shared libraries (the default with LOFAR), but libiberty.so is not installed on your system, only libiberty.a.\\ +=== 3.2 Casacore === 
-(See https://support.astron.nl/lofar_issuetracker/issues/8046).+[[https://github.com/casacore/casacore | Casacore]] also requires the CASA data.  
 +This is for example provided with [[http://casa.nrao.edu/casa_obtaining.shtml | CASA]]. \\ 
 +Here we assume CASA is already installed and can be found in the $CASAPATH given belowFor convenience this is link to the CASA folder. 
 +Then the data is in $CASAPATH/data. \\ 
 +We will specify this via -DDATA_DIR, otherwise we need a ~/.casarc file with the line: ''measures.directory: $HOME/local/casa/casa/data'' .\\
  
-4.) Sets the install path to $HOME/local/. +''-DENABLE_TABLELOCKING=NO'' switches off table locking, since read locks could not be acquired from the AIP Lustre file system leading to errors like: 
- +<file> 
-=== 3.2 Installation === +msoverview: Version 20110407GvD 
-So we can build the rest of the packages as follows:+2015-06-30 19:32:19     INFO            Process 13592: waiting for read-lock on file 
 +/lustre/fkbreitl/data/L206894/L206894.cal/L206894_SAP000_SB200_uv.MS.dppp_00001~00040/table.lock 
 +Error: Error (Function not implemented) when acquiring lock on 
 +/lustre/fkbreitl/data/L206894/L206894.cal/L206894_SAP000_SB200_uv.MS.dppp_00001~00040/table.lock 
 +</file> 
 +For practical work there is no disadvantage in disabling table locking. \\
  
 <file> <file>
-cd ~local/src/+# 2.1, 2.2 
 +cd ~/local/src/
 git clone https://github.com/casacore/casacore git clone https://github.com/casacore/casacore
 mkdir build/casacore mkdir build/casacore
 cd build/casacore cd build/casacore
-time cmake -DBUILD_PYTHON=yes -DBUILD_TESTING=NO -DCMAKE_INSTALL_PREFIX=~/local -DUSE_FFTW3=yes -DUSE_THREADS=YES +CASAPATH=$HOME/local/casa/casa 
-  -DUSE_OPENMP=yes -DDATA_DIR=~/local/data -DUSE_HDF5=yes -DCMAKE_PREFIX_PATH="$HOME/local;" ../../casacore +time cmake ../../casacore -DBUILD_PYTHON=YES -DCMAKE_INSTALL_PREFIX=~/local -DUSE_FFTW3=YES -DENABLE_TABLELOCKING=NO 
-time make -j12+  -DUSE_OPENMP=YES -DDATA_DIR=$CASAPATH/data -DUSE_HDF5=YES -DCMAKE_PREFIX_PATH=$HOME/local 
 +time make -j
 make install make install
- 
- 
-make install pip install python-casacore --global-option=build_ext --global-option=-I/usr/include/cfitsio:$HOME/local/include \ 
-   --global-option=-L$HOME/local/lib --install-option=--prefix=$HOME/local 
 </file> </file>
  
  
----- +=== 3.Pyrap ===
- +
-== 3.2.1 Alternative Pyrap installation == +
-Or alternatively if we don't want to install Pyrap with //pip// we can do:+
 <file> <file>
-cd ~/local/src/ git clone https://github.com/casacore/python-casacore.git+cd ~/local/src/ 
 +git clone https://github.com/casacore/python-casacore.git
 cd python-casacore cd python-casacore
 python setup.py build_ext -I/usr/include/cfitsio:$HOME/local/include -L$HOME/local/lib python setup.py build_ext -I/usr/include/cfitsio:$HOME/local/include -L$HOME/local/lib
Line 118: Line 198:
 </file> </file>
  
-----+ 
 +== 3.3.1 Alternative Pyrap installation == 
 +Alternatively we can install [[https://github.com/casacore/python-casacore | Pyrap]] with //pip// if we install pip before: 
 +<file> 
 +wget https://bootstrap.pypa.io/get-pip.py 
 +python get-pip.py --user 
 +~/.local/bin/pip install python-casacore --global-option=build_ext --global-option=-I/usr/include/cfitsio:$HOME/local/include \ 
 +   --global-option=-L$HOME/local/lib --install-option=--prefix=$HOME/local 
 +</file>
  
  
-=== 3.2 Installation (continued) ===+=== 3.4 Casarest ===
 Now we continue with the rest: Now we continue with the rest:
 <file> <file>
-cd ~local/src/+cd ~/local/src/
 svn co https://svn.astron.nl/casarest/trunk/casarest svn co https://svn.astron.nl/casarest/trunk/casarest
 mkdir build/casarest mkdir build/casarest
 cd build/casarest cd build/casarest
-cmake -DCASACORE_ROOT_DIR=$HOME/local -DBUILD_ALL=1 -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local +cmake ../../casarest -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local -DCASACORE_ROOT_DIR=$HOME/local -DCMAKE_PREFIX_PATH=/usr/include/cfitsio -DBUILD_ALL=1 \ 
-  -DCMAKE_PREFIX_PATH=/usr/include/cfitsio -DBoost_NO_BOOST_CMAKE=ON ../../casarest +  -DBOOST_ROOT=$HOME/local/src/boost_1_63_0 -DCMAKE_CXX_FLAGS="-lboost_thread -lboost_filesystem -L$HOME/local/lib" 
-time make -j12+# not necessary any more -DBoost_NO_BOOST_CMAKE=YES 
 +time make -j
 make install make install
 +</file>
  
  
-cd ~local/src/ +=== 3.5 AOFlagger === 
-svn checkout --ignore-externals https://svn.astron.nl/LOFAR/trunk LOFAR+The [[https://sourceforge.net/projects/aoflagger/ | AOFlagger]] is also required since the  
 +[[http://www.lofar.org/wiki/doku.php?id=public:offline_release_2_15_0 | LOFAR Offline release 2.15.0]]. \\ 
 +For further details see the LOFAR release link or the  
 +[[https://sourceforge.net/p/aoflagger/wiki/installation_instructions/ | installation instructions]]. \\ 
 +The AOFlagger v2.8.0 and later requires a version of Boost later than 1.41.0. 
 + 
 +<file> 
 +V_AOF=2.9.0  # 2.7.1, 2.8.0 
 +cd ~/local/src/ 
 +wget http://downloads.sourceforge.net/project/aoflagger/aoflagger-$AOVER/aoflagger-$V_AOF.tar.bz2 
 +tar xf aoflagger-$V_AOF.tar.bz2 
 +mkdir aoflagger-$V_AOF/build/ 
 +cd aoflagger-$V_AOF/build/ 
 +time cmake ../ -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local -DBUILD_SHARED_LIBS=YES -DBOOST_ROOT=$HOME/local/src/boost_1_63_0 \ 
 +  -DCMAKE_CXX_FLAGS="-lboost_thread -lboost_filesystem -L$HOME/local/lib" 
 +time make -j 
 +make install 
 +</file> 
 + 
 + 
 +=== 3.6 The LOFAR packages === 
 +Finally we can build the LOFAR packages. We can chose between [[http://www.lofar.org/operations/doku.php?id=maintenance:lofar_release_notes | a release]],  
 +[[http://www.lofar.org/operations/doku.php?id=public:lofar_offline_releases | an offline release]]  
 +or the latest version in [[https://svn.astron.nl/LOFAR/ | trunk/]] by commenting in and out the corresponding RELEASE lines. \\ 
 + 
 +''-DUSE_BACKTRACE=NO'' is necessary for building shared libraries (the default), but libiberty.so is not installed.\\ 
 +(See https://support.astron.nl/lofar_issuetracker/issues/8046). 
 + 
 +<file> 
 +cd ~/local/src/ 
 +RELEASE=LOFAR-Release-2_19 && svn checkout --ignore-externals -N https://svn.astron.nl/LOFAR/branches/$RELEASE 
 +# 2_16_4, 2_16, 2_12 
 +#RELEASE=LOFAR && svn checkout --ignore-externals -N https://svn.astron.nl/LOFAR/trunk $RELEASE 
 +svn update $RELEASE/CMake
 mkdir -p build/gnu_opt mkdir -p build/gnu_opt
 cd build/gnu_opt cd build/gnu_opt
-cmake -DCASACORE_ROOT_DIR=$HOME/local -DBUILD_SHARED_LIBS=ON -DUSE_OPENMP=ON -DBUILD_PACKAGES="DP3 Calibration" +time cmake ../../$RELEASE -DCASACORE_ROOT_DIR=$HOME/local -DBUILD_PACKAGES="DP3 Calibration" -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local -DUSE_BACKTRACE=NO 
-  -DCMAKE_INSTALL_PREFIX:PATH=$HOME/local -DUSE_LOG4CPLUS=NO -DUSE_BACKTRACE=OFF -DBoost_NO_BOOST_CMAKE=ON ../../LOFAR +-DUSE_LOG4CPLUS=NO was required in absence of the Log4cplus lib 
-time make -j12+time make -j
 make install make install
 </file> </file>
  • Last modified: 2015-06-26 17:40
  • by Frank Breitling