Differences
This shows you the differences between two versions of the page.
| public:meetings:glowbi2008:tutorial_wednesday [2010-11-16 15:01] – James M Anderson | public:meetings:glowbi2008:tutorial_wednesday [2017-03-08 15:27] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 8: | Line 8: | ||
| ===== Web Image of 3C129 ===== | ===== Web Image of 3C129 ===== | ||
| - | {{http://rsd-www.nrl.navy.mil/ | + | {{https:// |
| Wide-field 90 cm image of the large head-tail radio galaxy 3C129 (right). The bright source at the left is 3C129.1. From Lane et al., AJ, 123, 2985, 2002. | Wide-field 90 cm image of the large head-tail radio galaxy 3C129 (right). The bright source at the left is 3C129.1. From Lane et al., AJ, 123, 2985, 2002. | ||
| - | The 5 GHz observations being reduced here will only look at the central, brightest, portion of this source. | + | The 8.5 GHz observations being reduced here will only look at the central, brightest, portion of this source. |
| Line 44: | Line 44: | ||
| clron\\ | clron\\ | ||
| doweight 10\\ | doweight 10\\ | ||
| - | ncount | + | ncount |
| cparm(4)=28\\ | cparm(4)=28\\ | ||
| cparm(8)=10./ | cparm(8)=10./ | ||
| Line 58: | Line 58: | ||
| '' | '' | ||
| - | ==== Check where it went. You will need the C band version at 5 GHz ==== | + | ==== Check where it went. You will need the X band version at 8.5 GHz ==== |
| + | |||
| + | Note that there are multiple sequence numbers for the same bands, as the observation was done using different frequency settings. | ||
| Line 65: | Line 67: | ||
| pcat\\ | pcat\\ | ||
| - | getn 4\\ | + | getn 3\\ |
| imhe\\ | imhe\\ | ||
| '' | '' | ||
| < | < | ||
| - | <AIPS 1: Got(1) | + | AIPS 1: Got(1) |
| - | AIPS 1: Image=MULTI | + | AIPS 1: Image=MULTI |
| AIPS 1: Telescope=VLA | AIPS 1: Telescope=VLA | ||
| AIPS 1: Observer=AT166 | AIPS 1: Observer=AT166 | ||
| AIPS 1: Observ. date=25-JUL-1994 | AIPS 1: Observ. date=25-JUL-1994 | ||
| - | AIPS 1: # visibilities | + | AIPS 1: # visibilities |
| AIPS 1: Rand axes: UU-L-SIN | AIPS 1: Rand axes: UU-L-SIN | ||
| AIPS 1: SOURCE | AIPS 1: SOURCE | ||
| Line 82: | Line 84: | ||
| AIPS 1: COMPLEX | AIPS 1: COMPLEX | ||
| AIPS 1: STOKES | AIPS 1: STOKES | ||
| - | AIPS 1: FREQ | + | AIPS 1: FREQ |
| AIPS 1: IF | AIPS 1: IF | ||
| AIPS 1: RA | AIPS 1: RA | ||
| Line 109: | Line 111: | ||
| task ' | task ' | ||
| default\\ | default\\ | ||
| - | getn 4\\ | + | getn 3\\ |
| optype ' | optype ' | ||
| doweight 1\\ | doweight 1\\ | ||
| Line 132: | Line 134: | ||
| < | < | ||
| - | AIPS 1: Got(1) | + | |
| - | vlb054 | + | File = 19940725 |
| - | File = 19940725 | + | Freq = |
| - | Freq = | + | |
| Scan summary listing | Scan summary listing | ||
| Scan Source | Scan Source | ||
| - | 1 2345-167 | + | 1 2345-167 |
| - | 2 A2597 : | + | 2 A2597 : |
| - | 3 2345-167 | + | 3 2345-167 |
| - | 4 A2597 : | + | 4 A2597 : |
| - | 5 2345-167 | + | 5 2345-167 |
| - | 6 A2597 : | + | 6 A2597 : |
| - | 7 2345-167 | + | 7 2345-167 |
| - | 8 A2597 : | + | 8 A2597 : |
| - | 9 2345-167 | + | 9 2345-167 |
| - | 10 A2597 : | + | 10 A2597 : |
| - | 11 2345-167 | + | 11 2345-167 |
| - | 12 A2597 : | + | 12 A2597 : |
| - | 13 2345-167 | + | 13 2345-167 |
| - | 14 0420+417 | + | 14 0420+417 |
| - | 15 3C129 : | + | 15 3C129 : |
| - | 16 0420+417 | + | 16 0420+417 |
| - | 17 3C129 : | + | 17 3C129 : |
| - | 18 3C129 : 0003 | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | Type Q to stop, just hit RETURN to continue |
| + | |||
| + | | ||
| + | File = 19940725 | ||
| Source summary | Source summary | ||
| Line 177: | Line 181: | ||
| ID Source | ID Source | ||
| - | 1 2345-167 | + | 1 2345-167 |
| IF( 2) | IF( 2) | ||
| - | 2 A2597 : | + | 2 A2597 : |
| IF( 2) | IF( 2) | ||
| - | 3 0420+417 | + | 3 0420+417 |
| IF( 2) | IF( 2) | ||
| - | 4 3C129 : | + | 4 3C129 : |
| IF( 2) | IF( 2) | ||
| - | 5 0518+165 | + | 5 0518+165 |
| IF( 2) | IF( 2) | ||
| - | 6 0134+329 | + | 6 0134+329 |
| IF( 2) | IF( 2) | ||
| ID Source | ID Source | ||
| - | 1 All Sources | + | 1 All Sources |
| - | | + | |
| Frequency Table summary | Frequency Table summary | ||
| FQID IF# Freq(GHz) | FQID IF# Freq(GHz) | ||
| - | | + | |
| - | | + | |
| AIPS 1: Resumes | AIPS 1: Resumes | ||
| </ | </ | ||
| Line 236: | Line 240: | ||
| - | ===== Flag some bad data. Just run the commands. ===== | ||
| - | |||
| - | |||
| - | '' | ||
| - | task ' | ||
| - | default\\ | ||
| - | dohist 1\\ | ||
| - | getn 4\\ | ||
| - | antenna 1,0\\ | ||
| - | basel 0\\ | ||
| - | timer 0 13 45 20 0 15 0 0\\ | ||
| - | stokes ' '\\ | ||
| - | opcode ' | ||
| - | reason 'bad ant'\\ | ||
| - | outfgver 1\\ | ||
| - | go\\ | ||
| - | antenna 14,0\\ | ||
| - | timer 0 16 50 50 0 16 51 0\\ | ||
| - | go\\ | ||
| - | timer 0 | ||
| - | '' | ||
| Line 399: | Line 382: | ||
| antenna 22,0\\ | antenna 22,0\\ | ||
| basel 0\\ | basel 0\\ | ||
| - | sources ' '\\ | + | sources |
| calcode ' | calcode ' | ||
| bif 0\\ | bif 0\\ | ||
| Line 411: | Line 394: | ||
| < | < | ||
| - | Source=0518+165 : | + | Source=0420+417 : |
| - | Flux = 0.0000 Jy, Calcode = C , Freq = | + | Flux = 0.0000 Jy, Calcode = B , Freq = |
| Amplitudes, 1000 = | Amplitudes, 1000 = | ||
| - | 0/17:06: | + | Baselines |
| - | 0/17:07: | + | 0/16:47: |
| - | 0/17:07: | + | 0/16:48: |
| - | 0/17:07: | + | |
| - | 0/17:07: | + | 0/16:48:25 118 115 113 119 121 126 133 115 122 129 119 118 124 117 121 124 119 120 128 117 115 120 122 124 |
| - | 0/17:07: | + | |
| - | 0/17:07: | + | |
| - | 0/17:08: | + | |
| - | 0/17:08: | + | |
| - | 0/17:08: | + | |
| - | Type Q to stop, just hit RETURN to continue | + | |
| + | |||
| + | Source=0518+165 | ||
| + | Flux = 0.0000 Jy, Calcode = C , Freq = 8.514900000 GHz | ||
| + | Amplitudes, 1000 = | ||
| + | |||
| + | 0/17:03: | ||
| + | 0/17:03: | ||
| + | 0/17:03: | ||
| + | 0/17:03: | ||
| + | 0/17:04: | ||
| + | 0/17:04: | ||
| + | 0/17:04: | ||
| + | Type Q to stop, just hit RETURN to continue | ||
| - | | + | |
| - | Source=0518+165 | + | Source=0518+165 |
| Baselines | Baselines | ||
| - | 0/17:08: | + | 0/17:04: |
| - | 0/17:08: | + | 0/17:04: |
| - | 0/17:08: | + | 0/17:04: |
| - | 0/17:09: | + | 0/17:05: |
| - | 0/17:09: | + | 0/17:05: |
| - | 0/17:09: | + | 0/17:05: |
| - | 0/17:09: | + | 0/17:05: |
| - | 0/17:09: | + | 0/17:05: |
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| - | Source=0134+329 | + | Source=0134+329 |
| - | Flux = 0.0000 Jy, Calcode = C , Freq = | + | Flux = 0.0000 Jy, Calcode = C , Freq = |
| Amplitudes, 1000 = | Amplitudes, 1000 = | ||
| Baselines | Baselines | ||
| - | 0/17:22:05 629 683 677 671 687 | + | 0/17:18:35 247 246 256 263 275 264 291 261 253 281 |
| - | 0/17:22:15 630 683 673 666 690 669 685 655 630 723 | + | 0/17:18:45 242 241 253 262 272 261 287 256 250 280 |
| - | 0/17:22:25 635 687 671 677 690 671 685 652 631 732 | + | 0/17:18:55 246 241 252 265 273 263 289 257 252 280 |
| - | 0/17:22:35 632 683 669 671 692 669 687 651 632 727 | + | 0/17:19:05 241 239 249 260 268 264 287 257 249 279 |
| - | 0/17:22:45 629 680 675 668 689 672 687 657 639 730 | + | 0/17:19:15 240 239 248 257 264 257 288 255 248 277 |
| - | 0/17:22:55 627 684 670 672 695 669 684 652 629 729 | + | 0/17:19:25 245 235 247 259 266 261 284 257 247 276 |
| - | 0/17:23:05 632 685 673 680 695 669 686 649 640 728 | + | 0/17:19:35 244 238 249 259 269 263 283 258 248 277 |
| - | 0/17:23:15 635 683 670 673 694 675 689 651 637 728 | + | 0/17:19:45 240 237 251 260 266 260 284 255 248 274 |
| - | 0/17:23:25 635 679 672 676 696 667 687 657 631 724 | + | 0/17:19:55 245 240 250 258 267 259 287 258 247 276 |
| - | 0/17:23:35 634 684 668 673 690 662 682 653 634 726 | + | 0/17:20:05 240 238 249 259 266 259 286 256 247 277 |
| - | 0/17:23:45 628 685 668 678 684 666 684 651 638 732 | + | 0/17:20:15 242 234 251 257 264 259 284 254 247 274 |
| - | 0/17:23:55 629 680 672 674 690 671 682 650 637 729 | + | 0/17:20:25 245 235 253 259 270 261 286 257 252 277 |
| - | 0/17:24:05 632 686 672 679 695 672 680 654 639 727 | + | 0/17:20:35 240 239 253 261 269 263 289 260 249 276 |
| - | 0/17:24:15 630 686 672 674 693 671 689 658 636 728 | + | 0/17:20:45 245 236 253 260 266 258 286 259 248 276 |
| - | 0/17:24:25 630 685 674 680 690 676 683 657 637 729 | + | 0/17:20:55 245 238 254 257 267 260 284 260 248 277 |
| - | 0/17:24:35 637 681 673 678 693 670 687 658 634 732 | + | 0/17:21:05 242 238 251 259 267 259 281 258 245 275 |
| - | 0/17:24:45 632 686 670 677 692 670 685 655 634 722 | + | 0/17:21:15 242 238 254 260 268 261 288 262 247 274 |
| - | 0/17:24:55 634 685 675 678 697 675 682 657 632 727 | + | 0/17:21:25 246 235 251 257 268 256 286 257 246 276 |
| - | AIPS 1: Resumes | + | 0/17:21:35 247 238 254 260 271 267 287 261 249 276 264 265 269 260 237 262 218 251 282 256 256 242 266 281 |
| </ | </ | ||
| Line 475: | Line 475: | ||
| < | < | ||
| - | Source=0518+165 : | + | Source=0420+417 : |
| - | Flux = 0.0000 Jy, Calcode = C , Freq = | + | Flux = 0.0000 Jy, Calcode = B , Freq = |
| Phase, 1000 = 1000.00000 degrees, averging type = Vector | Phase, 1000 = 1000.00000 degrees, averging type = Vector | ||
| - | 0/17:06: | + | Baselines |
| - | 0/17:07:05 106 | + | 0/16:47:55 -85 -95 90-159-108 |
| - | 0/17:07:15 103 78-112 -79 140 -18-169 97 10 121 | + | 0/16:48: |
| - | 0/17:07:25 104 78-111 -78 141 -17-168 | + | |
| - | 0/17:07:35 102 77-112 -78 139 -19-169 | + | 0/16:48:25 -72 34 -81 101-147 -96 172 100 176-125 -64 -80 |
| - | 0/17:07:45 102 77-113 -79 138 -19-169 | + | |
| - | 0/17:07:55 | + | 0/16:48:45 -73 36 -80 96-149 -95 169 98 175-122 |
| - | 0/17:08:05 101 76-114 -77 138 -19-171 | + | |
| - | 0/17:08: | + | 0/16:49:05 -72 34 -85 92-146 -94 172 100 176-121 -64 -84 |
| - | 0/17:08: | + | |
| - | Type Q to stop, just hit RETURN to continue | + | 0/16:49:25 -74 34 -87 92-148 -91 169 |
| + | |||
| + | Source=0518+165 | ||
| + | Flux = 0.0000 Jy, Calcode = C , Freq = 8.514900000 GHz | ||
| + | Phase, 1000 = 1000.00000 degrees, averging type = Vector | ||
| + | |||
| + | | ||
| + | 0/17:03:35 -100 | ||
| + | | ||
| + | 0/17:03:55 -102 22 -88 102-157-113 169 100 -87-135 | ||
| + | | ||
| + | 0/17:04:15 -104 26 -88 101-156-114 169 103 -84-140 -73 -80 | ||
| + | 0/17:04:25 -105 26 -89 99-157-113 169 103 -84-141 -76 -83 | ||
| + | Type Q to stop, just hit RETURN to continue | ||
| - | | + | |
| - | Source=0518+165 | + | Source=0518+165 |
| Baselines | Baselines | ||
| - | 0/17:08: | + | 0/17:04:35 -100 32 -80 108-147-103 175 109 -76-135 -69 -77 |
| - | 0/17:08: | + | 0/17:04:45 -101 31 -80 107-147-103 167 108 -76-142 -70 -78 142 23 -81 165 -22 28-100 -41 -45 -99 124 33 |
| - | 0/17:08: | + | 0/17:04:55 -100 33 -80 109-145-102 173 109 -76-141 |
| - | 0/17:09: | + | 0/17:05:05 -102 30 -81 111-147-100 172 110 -74-141 -69 -81 |
| - | 0/17:09:15 | + | |
| - | 0/17:09:25 108 77-108 -77 140 -18-166 | + | 0/17:05:25 -105 |
| - | 0/17:09:35 | + | |
| - | 0/17:09:45 | + | 0/17:05:45 -111 33 -83 110-140 -94 172 108 -72-140 |
| + | 0/17:05:55 -112 | ||
| + | | ||
| + | 0/17:06:15 -113 32 -85 108-143 -93 171 108 -72-145 | ||
| + | | ||
| - | Source=0134+329 | + | Source=0134+329 |
| - | Flux = 0.0000 Jy, Calcode = C , Freq = | + | Flux = 0.0000 Jy, Calcode = C , Freq = |
| Phase, 1000 = 1000.00000 degrees, averging type = Vector | Phase, 1000 = 1000.00000 degrees, averging type = Vector | ||
| Baselines | Baselines | ||
| - | 0/17:22:05 | + | 0/17:18:35 -138 62 -85 125-129 -67 172 106 28-170 -47 -92 |
| - | 0/17:22:15 | + | 0/17:18:45 -139 55 -87 121-130 -71 169 105 25-172 -49 -94 |
| - | 0/17:22:25 | + | 0/17:18:55 -139 54 -84 124-132 -70 163 104 22-174 |
| - | 0/17:22:35 | + | 0/17:19:05 -144 48 -86 118-130 -74 153 100 |
| - | 0/17:22:45 | + | 0/17:19:15 -147 46 -87 117-135 -81 152 100 7 172 -62-105 |
| - | 0/17:22:55 | + | 0/17:19:25 -147 42 -91 114-131 -87 149 97 |
| - | 0/17:23:05 | + | |
| - | 0/17:23:15 | + | 0/17:19:45 -147 38 -89 115-134 -88 147 93 -9 163 -79-107 |
| - | 0/17:23:25 | + | 0/17:19:55 -150 37 -90 115-139 -93 145 90 -15 165 -82-104 |
| - | 0/17:23:35 | + | 0/17:20:05 -150 40 -83 116-143 -91 144 89 -16 167 -82 -99 168 -17 -81 136 49 94 -67 |
| - | 0/17:23:45 | + | 0/17:20:15 -149 41 -76 120-135 -89 148 94 -13 173 -83 -97 |
| - | 0/17:23:55 | + | 0/17:20:25 -146 43 -73 123-139 |
| - | 0/17:24:05 | + | 0/17:20:35 -147 46 -73 122-133 -91 151 94 -14 178 -85 -96 |
| - | 0/17:24:15 | + | 0/17:20:45 -146 45 -71 120-137 -88 154 97 -15-178 |
| - | 0/17:24:25 | + | 0/17:20:55 -143 49 -66 121-131 |
| - | 0/17:24:35 | + | 0/17:21:05 -149 40 -70 114-137 -82 159 |
| - | 0/17:24:45 | + | 0/17:21:15 -153 38 -71 108-142 -82 160 98 -11-164 -92 -85 |
| - | 0/17:24:55 | + | 0/17:21:25 -156 37 -74 105-144 -84 157 92 -19-170 |
| - | AIPS 1: Resumes | + | 0/17:21:35 -152 43 -76 104-142 -78 161 94 -13-164 |
| </ | </ | ||
| Line 534: | Line 551: | ||
| '' | '' | ||
| + | ===== Flag some bad data. Just run the commands. ===== | ||
| + | |||
| + | |||
| + | '' | ||
| + | task ' | ||
| + | reason 'slow start' | ||
| + | sources ' '\\ | ||
| + | calcode ' '\\ | ||
| + | stokes ' '\\ | ||
| + | timer 0\\ | ||
| + | antenna 17 0\\ | ||
| + | flagver 1\\ | ||
| + | opcode ' | ||
| + | basel 0\\ | ||
| + | bif 1\\ | ||
| + | eif 1\\ | ||
| + | aparm 0\\ | ||
| + | aparm(2) 72.5/60\\ | ||
| + | go\\ | ||
| + | \\ | ||
| + | \\ | ||
| + | reason ' | ||
| + | sources ' '\\ | ||
| + | calcode ' '\\ | ||
| + | stokes ' '\\ | ||
| + | timer 0\\ | ||
| + | antenna 0\\ | ||
| + | flagver 1\\ | ||
| + | opcode ' | ||
| + | basel 0\\ | ||
| + | bif 2\\ | ||
| + | eif 2\\ | ||
| + | aparm 0\\ | ||
| + | aparm(2) 22.5/60\\ | ||
| + | go\\ | ||
| + | '' | ||
| + | |||
| + | '' | ||
| + | task ' | ||
| + | default\\ | ||
| + | dohist 1\\ | ||
| + | getn 3\\ | ||
| + | antenna 14,0\\ | ||
| + | basel 0\\ | ||
| + | timer 0 15 10 50 0 15 55 0\\ | ||
| + | stokes ' '\\ | ||
| + | bif 2\\ | ||
| + | eif 2\\ | ||
| + | opcode ' | ||
| + | reason 'bad ant'\\ | ||
| + | outfgver 1\\ | ||
| + | go\\ | ||
| + | timer 0 13 25 30 0 13 27 40\\ | ||
| + | go\\ | ||
| + | timer 0 13 59 0 0 14 2 20\\ | ||
| + | go\\ | ||
| + | timer 0\\ | ||
| + | bif 0\\ | ||
| + | eif 0\\ | ||
| + | antenna 0\\ | ||
| + | '' | ||
| ===== Start the calibration ===== | ===== Start the calibration ===== | ||
| Line 543: | Line 621: | ||
| task ' | task ' | ||
| default\\ | default\\ | ||
| - | getn 4\\ | + | getn 3\\ |
| source ' | source ' | ||
| bif 0\\ | bif 0\\ | ||
| Line 561: | Line 639: | ||
| vlb054> SETJY1: / Flux calculated using known spectrum | vlb054> SETJY1: / Flux calculated using known spectrum | ||
| vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | ||
| - | vlb054> SETJY1: ' | + | vlb054> SETJY1: ' |
| - | vlb054> SETJY1: ' | + | vlb054> SETJY1: ' |
| vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | ||
| vlb054> SETJY1: Appears to have ended successfully | vlb054> SETJY1: Appears to have ended successfully | ||
| Line 572: | Line 650: | ||
| eif 1\\ | eif 1\\ | ||
| optype ' '\\ | optype ' '\\ | ||
| - | zerosp | + | zerosp |
| go\\ | go\\ | ||
| bif 2\\ | bif 2\\ | ||
| eif 2\\ | eif 2\\ | ||
| - | zerosp | + | zerosp |
| go\\ | go\\ | ||
| '' | '' | ||
| Line 592: | Line 670: | ||
| < | < | ||
| - | vlb054> SETJY1: Task SETJY (release of 31DEC08) begins | + | vlb054> SETJY1: Task SETJY (release of 31DEC10) begins |
| vlb054> SETJY1: **WARNING: OPCODE=CALC AND FREQID = -1 | vlb054> SETJY1: **WARNING: OPCODE=CALC AND FREQID = -1 | ||
| vlb054> SETJY1: | vlb054> SETJY1: | ||
| - | vlb054> SETJY1: A source model for this calibrator | + | vlb054> SETJY1: A source model for this calibrator |
| - | vlb054> SETJY1: | + | vlb054> SETJY1: |
| - | vlb054> SETJY1: A source model for this calibrator may be available | + | |
| - | vlb054> SETJY1: Use the verb CALDIR to see if there is one | + | |
| vlb054> SETJY1: / Flux calculated using known spectrum | vlb054> SETJY1: / Flux calculated using known spectrum | ||
| vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | ||
| - | vlb054> SETJY1: ' | + | vlb054> SETJY1: ' |
| - | vlb054> SETJY1: ' | + | vlb054> SETJY1: ' |
| vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | ||
| vlb054> SETJY1: Appears to have ended successfully | vlb054> SETJY1: Appears to have ended successfully | ||
| - | vlb054> SETJY1: vlb054 | + | vlb054> SETJY1: vlb054 |
| </ | </ | ||
| + | |||
| + | '' | ||
| + | bif 1\\ | ||
| + | eif 1\\ | ||
| + | optype ' '\\ | ||
| + | zerosp 3.2045, 0.0772, -0.1722, 0.0\\ | ||
| + | go\\ | ||
| + | bif 2\\ | ||
| + | eif 2\\ | ||
| + | zerosp 3.0714, 0.0740, -0.1650, 0.0\\ | ||
| + | go\\ | ||
| + | \\ | ||
| + | bif 0\\ | ||
| + | eif 0\\ | ||
| + | '' | ||
| + | |||
| Line 671: | Line 763: | ||
| '' | '' | ||
| - | task ' | + | task ' |
| getn 12\\ | getn 12\\ | ||
| cparm 0\\ | cparm 0\\ | ||
| Line 743: | Line 835: | ||
| do3col 1\\ | do3col 1\\ | ||
| dotv 1\\ | dotv 1\\ | ||
| + | xinc 1\\ | ||
| nplots 9\\ | nplots 9\\ | ||
| tvinit\\ | tvinit\\ | ||
| Line 780: | Line 873: | ||
| < | < | ||
| vlb054> GETJY1: Task GETJY (release of 31DEC10) begins | vlb054> GETJY1: Task GETJY (release of 31DEC10) begins | ||
| - | vlb054> GETJY1: Calibrator robust averaging used | + | vlb054> GETJY1: Calibrator robust averaging used |
| vlb054> GETJY1: | vlb054> GETJY1: | ||
| - | vlb054> GETJY1: 0420+417 | + | vlb054> GETJY1: 0420+417 |
| - | vlb054> GETJY1: | + | vlb054> GETJY1: |
| vlb054> GETJY1: | vlb054> GETJY1: | ||
| - | vlb054> GETJY1: 0420+417 | + | vlb054> GETJY1: 0420+417 |
| vlb054> GETJY1: Appears to have ended successfully | vlb054> GETJY1: Appears to have ended successfully | ||
| - | vlb054> GETJY1: vlb054 | + | vlb054> GETJY1: vlb054 31DEC10 TST: Cpu= 0.0 Real= 0 |
| </ | </ | ||
| Line 825: | Line 918: | ||
| ===== Have a look at the calibration ===== | ===== Have a look at the calibration ===== | ||
| - | ==== Plots ==== | + | |
| ==== Plots ==== | ==== Plots ==== | ||
| Line 943: | Line 1036: | ||
| < | < | ||
| vlb054> PCAL 1: Calibration source | vlb054> PCAL 1: Calibration source | ||
| - | vlb054> PCAL 1: | + | vlb054> PCAL 1: |
| - | vlb054> PCAL 1: Pol. inten. = 0.03899 +/- 0.000150 | + | vlb054> PCAL 1: Pol. inten. = 0.06906 +/- 0.000124 |
| - | vlb054> PCAL 1: Pol. angle = 52.69 +/- 0.078 deg | + | vlb054> PCAL 1: Pol. angle = -53.92 +/- 0.036 deg |
| - | vlb054> PCAL 1: 0420+417 | + | vlb054> PCAL 1: 0420+417 |
| vlb054> PCAL 1: Calibration source | vlb054> PCAL 1: Calibration source | ||
| - | vlb054> PCAL 1: | + | vlb054> PCAL 1: |
| - | vlb054> PCAL 1: Pol. inten. = 0.03518 +/- 0.000160 | + | vlb054> PCAL 1: Pol. inten. = 0.06922 +/- 0.000163 |
| - | vlb054> PCAL 1: Pol. angle = | + | vlb054> PCAL 1: Pol. angle = |
| - | vlb054> PCAL 1: 0420+417 | + | vlb054> PCAL 1: 0420+417 |
| </ | </ | ||
| Line 963: | Line 1056: | ||
| timer 0\\ | timer 0\\ | ||
| antenna 0\\ | antenna 0\\ | ||
| - | uvrange 0,45\\ | + | uvrange 0\\ |
| docalib 1\\ | docalib 1\\ | ||
| gainuse 2\\ | gainuse 2\\ | ||
| Line 972: | Line 1065: | ||
| < | < | ||
| - | Ampscalar average of matrix | + | Ampscalar average of matrix |
| - | Ampscalar average of matrix | + | Ampscalar average of matrix |
| </ | </ | ||
| Line 985: | Line 1078: | ||
| AIPS 1: Adverbs | AIPS 1: Adverbs | ||
| AIPS 1: ---------------------------------------------------------------- | AIPS 1: ---------------------------------------------------------------- | ||
| - | AIPS 1: CLCORPRM | + | AIPS 1: CLCORPRM |
| AIPS 1: *rest 0 | AIPS 1: *rest 0 | ||
| </ | </ | ||
| Line 1005: | Line 1098: | ||
| http:// | http:// | ||
| - | Correct number is -21.71 | + | Correct number is -22.98 |
| Line 1011: | Line 1104: | ||
| '' | '' | ||
| - | for i=1 to 2;clcorp(i) = -21.71 - clcorp(i); | + | for i=1 to 2;clcorp(i) = -22.98 - clcorp(i); |
| '' | '' | ||
| Line 1038: | Line 1131: | ||
| timer 0\\ | timer 0\\ | ||
| antenna 0\\ | antenna 0\\ | ||
| - | uvrange 0,45\\ | + | uvrange 0\\ |
| docalib 1\\ | docalib 1\\ | ||
| gainuse 3\\ | gainuse 3\\ | ||
| Line 1056: | Line 1149: | ||
| AIPS 1: Adverbs | AIPS 1: Adverbs | ||
| AIPS 1: ---------------------------------------------------------------- | AIPS 1: ---------------------------------------------------------------- | ||
| - | AIPS 1: CLCORPRM | + | AIPS 1: CLCORPRM |
| AIPS 1: *rest 0 | AIPS 1: *rest 0 | ||
| </ | </ | ||
| + | |||
| + | ==== Save the tables again ==== | ||
| + | '' | ||
| + | task ' | ||
| + | clro\\ | ||
| + | outdi 1\\ | ||
| + | go\\ | ||
| + | '' | ||
| - | ############### | ||
| ===== Now start with the smaller array data. Load it in ===== | ===== Now start with the smaller array data. Load it in ===== | ||
| + | |||
| + | (Actually, in the 2010 Nov 16 version of these instructions, | ||
| + | |||
| ==== FILLM ==== | ==== FILLM ==== | ||
| Line 1094: | Line 1197: | ||
| AIPS 1: Catalog on disk 1 | AIPS 1: Catalog on disk 1 | ||
| AIPS 1: Cat Usid Mapname | AIPS 1: Cat Usid Mapname | ||
| - | AIPS 1: 1 | + | AIPS 1: 1 |
| - | AIPS 1: 2 | + | AIPS 1: 2 |
| - | AIPS 1: 3 | + | AIPS 1: 3 |
| - | AIPS 1: 4 | + | AIPS 1: 4 |
| - | AIPS 1: 5 | + | AIPS 1: 5 |
| - | AIPS 1: 6 | + | AIPS 1: 6 |
| - | AIPS 1: 7 | + | AIPS 1: 7 |
| - | AIPS 1: 8 | + | AIPS 1: 8 |
| - | AIPS 1: 9 | + | AIPS 1: 9 |
| - | AIPS 1: | + | AIPS 1: |
| - | AIPS 1: | + | AIPS 1: |
| - | AIPS 1: | + | AIPS 1: |
| - | AIPS 1: | + | AIPS 1: |
| </ | </ | ||
| - | ==== Makre sure we have the right one ==== | + | ==== Make sure we have the right one ==== |
| '' | '' | ||
| - | getn 13\\ | + | getn 9\\ |
| imhe\\ | imhe\\ | ||
| '' | '' | ||
| Line 1124: | Line 1227: | ||
| task ' | task ' | ||
| default\\ | default\\ | ||
| - | getn 13\\ | + | getn 9\\ |
| optype ' | optype ' | ||
| doweight 1\\ | doweight 1\\ | ||
| Line 1131: | Line 1234: | ||
| < | < | ||
| - | | + | |
| - | File = 19941103 | + | File = 19940725 |
| - | Freq = | + | Freq = |
| Scan summary listing | Scan summary listing | ||
| Scan Source | Scan Source | ||
| - | 1 0134+329 | + | 1 0134+329 |
| - | 2 0420+417 | + | 2 0134+329 |
| - | 3 0518+165 | + | |
| - | | + | 4 0053-016 |
| - | 5 0420+417 | + | 5 0053-015 |
| - | 6 0420+417 | + | 6 0056-001 |
| - | 7 3C129 : | + | 7 0053-016 |
| - | 8 0420+417 | + | 8 0053-015 |
| - | 9 3C129 : | + | 9 0056-001 |
| - | | + | 10 0053-016 |
| + | 11 0053-015 | ||
| + | 12 0056-001 | ||
| + | 13 0053-016 | ||
| + | 14 0053-015 | ||
| + | 15 0056-001 | ||
| + | 16 0053-016 : 0002 1101/06:55:34 - 101/ | ||
| + | 17 0053-015 | ||
| + | 18 0056-001 | ||
| + | | ||
| + | 20 0518+165 | ||
| + | 21 3C129 : 0002 1101/08:02:45 - 101/08:17:55 1 | ||
| + | | ||
| + | 23 0420+417 | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | Type Q to stop, just hit RETURN to continue | ||
| + | |||
| + | | ||
| + | File = 19940725 | ||
| Source summary | Source summary | ||
| Line 1152: | Line 1276: | ||
| ID Source | ID Source | ||
| - | 1 0134+329 | + | 1 0134+329 |
| IF( 2) | IF( 2) | ||
| - | | + | |
| IF( 2) | IF( 2) | ||
| - | | + | |
| IF( 2) | IF( 2) | ||
| - | 4 3C129 : | + | |
| + | IF( 2) | ||
| + | 5 0420+417 | ||
| + | IF( 2) | ||
| + | 6 0518+165 | ||
| + | IF( 2) | ||
| + | | ||
| IF( 2) | IF( 2) | ||
| ID Source | ID Source | ||
| - | 1 All Sources | + | 1 All Sources |
| - | | + | |
| Frequency Table summary | Frequency Table summary | ||
| FQID IF# Freq(GHz) | FQID IF# Freq(GHz) | ||
| - | | + | |
| - | | + | |
| - | AIPS 1: Resumes | + | |
| </ | </ | ||
| Line 1212: | Line 1340: | ||
| - | ===== Flag some bad data. Just run the commands and think about this later. ===== | ||
| - | |||
| - | '' | ||
| - | task ' | ||
| - | default\\ | ||
| - | dohist 1\\ | ||
| - | getn 13\\ | ||
| - | antenna 0\\ | ||
| - | basel 0\\ | ||
| - | timer 0 0 0 0 0 4 8 0\\ | ||
| - | stokes ' '\\ | ||
| - | opcode ' | ||
| - | reason 'bad scan' | ||
| - | outfgver 1\\ | ||
| - | go\\ | ||
| - | timer 0 8 18 0 0 8 30 0\\ | ||
| - | go\\ | ||
| - | antenna 0\\ | ||
| - | timer 0 9 10 0 0 9 15 0\\ | ||
| - | go\\ | ||
| - | reason 'bad ant\\ | ||
| - | antenna 4,0\\ | ||
| - | timer 0\\ | ||
| - | '' | ||
| ===== Check out some properties of the raw data ===== | ===== Check out some properties of the raw data ===== | ||
| Line 1255: | Line 1359: | ||
| gainuse 1\\ | gainuse 1\\ | ||
| bparm 0 1\\ | bparm 0 1\\ | ||
| + | aparm 0\\ | ||
| + | refant 3\\ | ||
| + | antennas 0\\ | ||
| do3col 1\\ | do3col 1\\ | ||
| dotv 1\\ | dotv 1\\ | ||
| + | tvinit\\ | ||
| + | go\\ | ||
| + | source ' | ||
| tvinit\\ | tvinit\\ | ||
| go\\ | go\\ | ||
| Line 1267: | Line 1377: | ||
| bparm 6 7\\ | bparm 6 7\\ | ||
| source ' | source ' | ||
| + | tvinit\\ | ||
| + | go\\ | ||
| + | source ' | ||
| tvinit\\ | tvinit\\ | ||
| go\\ | go\\ | ||
| Line 1289: | Line 1402: | ||
| antenna 4,0\\ | antenna 4,0\\ | ||
| basel 0\\ | basel 0\\ | ||
| - | sources ' '\\ | + | sources |
| calcode ' | calcode ' | ||
| bif 0\\ | bif 0\\ | ||
| Line 1297: | Line 1410: | ||
| dparm 0\\ | dparm 0\\ | ||
| go\\ | go\\ | ||
| + | \\ | ||
| + | dparm 1 0\\ | ||
| + | go\\ | ||
| + | dparm 0\\ | ||
| + | |||
| '' | '' | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ===== Flag some bad data. Just run the commands and think about this later. ===== | ||
| + | |||
| + | |||
| + | '' | ||
| + | task ' | ||
| + | reason ' | ||
| + | sources ' '\\ | ||
| + | calcode ' '\\ | ||
| + | stokes ' '\\ | ||
| + | timer 0\\ | ||
| + | antenna 0\\ | ||
| + | flagver 1\\ | ||
| + | opcode ' | ||
| + | basel 0\\ | ||
| + | bif 0\\ | ||
| + | eif 0\\ | ||
| + | aparm 0\\ | ||
| + | aparm(2) 22.5/60\\ | ||
| + | go\\ | ||
| + | '' | ||
| + | |||
| + | '' | ||
| + | task ' | ||
| + | default\\ | ||
| + | dohist 1\\ | ||
| + | getn 9\\ | ||
| + | antenna 0\\ | ||
| + | basel 0\\ | ||
| + | timer 101 4 3 50 101 4 4 20\\ | ||
| + | stokes ' '\\ | ||
| + | bif 0\\ | ||
| + | eif 0\\ | ||
| + | opcode ' | ||
| + | reason ' | ||
| + | outfgver 1\\ | ||
| + | go\\ | ||
| + | timer 0\\ | ||
| + | bif 0\\ | ||
| + | eif 0\\ | ||
| + | antenna 0\\ | ||
| + | '' | ||
| + | |||
| ===== Begin the calibration ===== | ===== Begin the calibration ===== | ||
| ==== Apply the flux densities for the known calibrators ==== | ==== Apply the flux densities for the known calibrators ==== | ||
| - | |||
| Line 1309: | Line 1475: | ||
| task ' | task ' | ||
| default\\ | default\\ | ||
| - | getn 13\\ | + | getn 9\\ |
| source ' | source ' | ||
| bif 0\\ | bif 0\\ | ||
| eif 0\\ | eif 0\\ | ||
| optype ' | optype ' | ||
| - | aparm(2) | + | aparm(2) |
| go\\ | go\\ | ||
| '' | '' | ||
| Line 1320: | Line 1486: | ||
| < | < | ||
| + | vlb054> SETJY1: Task SETJY (release of 31DEC10) begins | ||
| + | vlb054> SETJY1: **WARNING: OPCODE=CALC AND FREQID = -1 | ||
| + | vlb054> SETJY1: | ||
| + | vlb054> SETJY1: A source model for this calibrator is available | ||
| + | vlb054> SETJY1: Consult the help file for CALRD for assistance | ||
| + | vlb054> SETJY1: / Flux calculated using known spectrum | ||
| vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | ||
| - | vlb054> SETJY1: ' | + | vlb054> SETJY1: ' |
| - | vlb054> SETJY1: ' | + | vlb054> SETJY1: ' |
| vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | ||
| + | vlb054> SETJY1: Appears to have ended successfully | ||
| + | vlb054> SETJY1: vlb054 | ||
| </ | </ | ||
| - | |||
| '' | '' | ||
| Line 1331: | Line 1504: | ||
| eif 1\\ | eif 1\\ | ||
| optype ' '\\ | optype ' '\\ | ||
| - | zerosp | + | zerosp |
| go\\ | go\\ | ||
| bif 2\\ | bif 2\\ | ||
| eif 2\\ | eif 2\\ | ||
| - | zerosp | + | zerosp |
| go\\ | go\\ | ||
| '' | '' | ||
| Line 1346: | Line 1519: | ||
| zerosp 0\\ | zerosp 0\\ | ||
| optype ' | optype ' | ||
| + | source = ' | ||
| + | go | ||
| + | '' | ||
| + | |||
| + | < | ||
| + | vlb054> SETJY1: Task SETJY (release of 31DEC10) begins | ||
| + | vlb054> SETJY1: **WARNING: OPCODE=CALC AND FREQID = -1 | ||
| + | vlb054> SETJY1: | ||
| + | vlb054> SETJY1: A source model for this calibrator is available | ||
| + | vlb054> SETJY1: Consult the help file for CALRD for assistance | ||
| + | vlb054> SETJY1: / Flux calculated using known spectrum | ||
| + | vlb054> SETJY1: BIF = 1 EIF = 2 /Range of IFs | ||
| + | vlb054> SETJY1: ' | ||
| + | vlb054> SETJY1: ' | ||
| + | vlb054> SETJY1: / Using (1995.2) VLA or Reynolds (1934-638) coefficients | ||
| + | vlb054> SETJY1: Appears to have ended successfully | ||
| + | vlb054> SETJY1: vlb054 | ||
| + | </ | ||
| + | |||
| + | |||
| + | '' | ||
| + | bif 1\\ | ||
| + | eif 1\\ | ||
| + | optype ' '\\ | ||
| + | zerosp 3.2045, 0.0772, -0.1722, 0.0 | ||
| + | go\\ | ||
| + | bif 2\\ | ||
| + | eif 2\\ | ||
| + | zerosp 3.0714, 0.0740, -0.1650, 0.0 | ||
| + | go\\ | ||
| + | \\ | ||
| + | bif 0\\ | ||
| + | eif 0\\ | ||
| + | '' | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ==== Convert the (u,v) data to the epoch of the calibration images ==== | ||
| + | |||
| + | |||
| + | Note: it is possible to change the epoch of the calibration image headers to B1950, but there would remain a small error in the rotation of the coordinate system. | ||
| + | |||
| + | |||
| + | '' | ||
| + | task ' | ||
| + | clron\\ | ||
| + | outdisk 1\\ | ||
| + | shift 0\\ | ||
| + | uvfixprm 0\\ | ||
| + | go\\ | ||
| + | '' | ||
| + | |||
| + | Now fix the index table. | ||
| + | |||
| + | '' | ||
| + | pcat | ||
| + | '' | ||
| + | |||
| + | '' | ||
| + | task ' | ||
| + | getn 16\\ | ||
| + | cparm 0\\ | ||
| + | cparm(3)= -1\\ | ||
| + | bparm 0\\ | ||
| + | go\\ | ||
| + | cparm 0\\ | ||
| '' | '' | ||
| Line 1354: | Line 1594: | ||
| task ' | task ' | ||
| default\\ | default\\ | ||
| - | getn 13\\ | + | getn 16\\ |
| calsour ' | calsour ' | ||
| uvrange 0\\ | uvrange 0\\ | ||
| antenna 0\\ | antenna 0\\ | ||
| - | refant | + | refant |
| minamper 10\\ | minamper 10\\ | ||
| minphser 10\\ | minphser 10\\ | ||
| weightit 1\\ | weightit 1\\ | ||
| - | get2n 6\\ | + | get2n 10\\ |
| ncomp 0\\ | ncomp 0\\ | ||
| solmode ' | solmode ' | ||
| aparm(6) 2\\ | aparm(6) 2\\ | ||
| - | solint | + | solint |
| solsub 2\\ | solsub 2\\ | ||
| cparm(3) 10\\ | cparm(3) 10\\ | ||
| Line 1373: | Line 1613: | ||
| clrmsg\\ | clrmsg\\ | ||
| '' | '' | ||
| + | |||
| + | ==== Calibrate 3C48 ==== | ||
| + | |||
| + | '' | ||
| + | get2n 11\\ | ||
| + | calsour ' | ||
| + | solint 1\\ | ||
| + | uvrange 0\\ | ||
| + | go\\ | ||
| + | clrmsg\\ | ||
| + | '' | ||
| + | |||
| ==== Calibrate the phase calibrator ==== | ==== Calibrate the phase calibrator ==== | ||
| + | |||
| + | In this step we will try to get an amplitude calibration of the phase calibrator. | ||
| + | |||
| '' | '' | ||
| clr2n\\ | clr2n\\ | ||
| calsour ' | calsour ' | ||
| - | solint | + | solint |
| uvrange 0\\ | uvrange 0\\ | ||
| + | timer 101 0 0 0 101 8 0 0\\ | ||
| go\\ | go\\ | ||
| clrmsg\\ | clrmsg\\ | ||
| '' | '' | ||
| + | |||
| ==== Check the results ==== | ==== Check the results ==== | ||
| Line 1406: | Line 1663: | ||
| go\\ | go\\ | ||
| inver 2\\ | inver 2\\ | ||
| + | optype ' | ||
| + | go\\ | ||
| + | optype ' | ||
| + | go\\ | ||
| + | inver 3\\ | ||
| optype ' | optype ' | ||
| go\\ | go\\ | ||
| Line 1419: | Line 1681: | ||
| task ' | task ' | ||
| sources ' | sources ' | ||
| - | calsour ' | + | calsour ' |
| calcode ' '\\ | calcode ' '\\ | ||
| bif 0\\ | bif 0\\ | ||
| Line 1431: | Line 1693: | ||
| < | < | ||
| - | vlb054> GETJY1: Task GETJY (release of 31DEC08) begins\\ | + | vlb054> GETJY1: Task GETJY (release of 31DEC10) begins |
| + | vlb054> GETJY1: Calibrator robust averaging used 818 of 818 gain samples | ||
| vlb054> GETJY1: | vlb054> GETJY1: | ||
| - | vlb054> GETJY1: 0420+417 | + | vlb054> GETJY1: 0420+417 |
| - | vlb054> GETJY1: | + | vlb054> GETJY1: |
| + | vlb054> GETJY1: | ||
| + | vlb054> GETJY1: 0420+417 | ||
| vlb054> GETJY1: Appears to have ended successfully | vlb054> GETJY1: Appears to have ended successfully | ||
| - | vlb054> GETJY1: vlb054 | + | vlb054> GETJY1: vlb054 |
| </ | </ | ||
| Line 1442: | Line 1707: | ||
| ==== Redo the phase calibrator calibration ==== | ==== Redo the phase calibrator calibration ==== | ||
| - | Now that we know the flux density of the phase calibrator, run through its calibration again, just to be sure AIPS doesn' | + | Now that we know the flux density of the phase calibrator, run through its calibration again, just to be sure AIPS doesn' |
| Line 1448: | Line 1713: | ||
| '' | '' | ||
| inext ' | inext ' | ||
| - | inver 2\\ | + | inver 3\\ |
| extdest\\ | extdest\\ | ||
| inver 0\\ | inver 0\\ | ||
| tget calib\\ | tget calib\\ | ||
| + | timer 0\\ | ||
| go\\ | go\\ | ||
| clrmsg\\ | clrmsg\\ | ||
| Line 1461: | Line 1727: | ||
| '' | '' | ||
| task ' | task ' | ||
| - | sources ' | + | sources ' |
| - | calsour ' | + | calsour ' |
| opcode ' | opcode ' | ||
| gainver 1\\ | gainver 1\\ | ||
| gainuse 2\\ | gainuse 2\\ | ||
| - | refant | + | refant |
| interp ' | interp ' | ||
| doblank 1\\ | doblank 1\\ | ||
| go\\ | go\\ | ||
| '' | '' | ||
| + | |||
| ===== Check the results ===== | ===== Check the results ===== | ||
| Line 1515: | Line 1782: | ||
| task ' | task ' | ||
| clro\\ | clro\\ | ||
| + | outdi 1\\ | ||
| go\\ | go\\ | ||
| '' | '' | ||
| + | |||
| ==== Run the polarization calibration on the phase calibrator ==== | ==== Run the polarization calibration on the phase calibrator ==== | ||
| Line 1526: | Line 1795: | ||
| timer 0\\ | timer 0\\ | ||
| antenna 0\\ | antenna 0\\ | ||
| - | uvrange 0\\ | + | uvrange |
| bif 0\\ | bif 0\\ | ||
| eif 0\\ | eif 0\\ | ||
| Line 1536: | Line 1805: | ||
| soltype ' | soltype ' | ||
| prtlev 1\\ | prtlev 1\\ | ||
| - | refant | + | refant |
| bparm 0\\ | bparm 0\\ | ||
| cparm 0\\ | cparm 0\\ | ||
| Line 1545: | Line 1814: | ||
| < | < | ||
| - | vlb054> PCAL 1: Calibration source | + | vlb054> PCAL 1: Calibration source |
| - | vlb054> PCAL 1: | + | vlb054> PCAL 1: |
| - | vlb054> PCAL 1: Pol. inten. = 0.04727 +/- 0.000386 | + | vlb054> PCAL 1: Pol. inten. = 0.08905 +/- 0.000758 |
| - | vlb054> | + | vlb054> PCAL 1: |
| - | vlb054> PCAL 1: 0420+417 | + | vlb054> PCAL 1: 0420+417 |
| - | vlb054> | + | vlb054> PCAL 1: Calibration source |
| - | vlb054> PCAL 1: Calibration source | + | vlb054> PCAL 1: |
| - | vlb054> PCAL 1: | + | vlb054> PCAL 1: Pol. inten. = 0.09068 +/- 0.000988 |
| - | vlb054> PCAL 1: Pol. inten. = 0.04385 +/- 0.000392 | + | vlb054> PCAL 1: |
| - | vlb054> | + | vlb054> PCAL 1: 0420+417 |
| - | vlb054> PCAL 1: 0420+417 | + | |
| - | vlb054> | + | |
| </ | </ | ||
| Line 1568: | Line 1835: | ||
| timer 0\\ | timer 0\\ | ||
| antenna 0\\ | antenna 0\\ | ||
| - | uvrange 0,45\\ | + | uvrange 0\\ |
| docalib 1\\ | docalib 1\\ | ||
| gainuse 2\\ | gainuse 2\\ | ||
| Line 1585: | Line 1852: | ||
| AIPS 1: Adverbs | AIPS 1: Adverbs | ||
| AIPS 1: ---------------------------------------------------------------- | AIPS 1: ---------------------------------------------------------------- | ||
| - | AIPS 1: CLCORPRM | + | AIPS 1: CLCORPRM |
| AIPS 1: *rest 0 | AIPS 1: *rest 0 | ||
| </ | </ | ||
| Line 1594: | Line 1861: | ||
| task ' | task ' | ||
| clro\\ | clro\\ | ||
| + | outdi 1\\ | ||
| go\\ | go\\ | ||
| '' | '' | ||
| Line 1603: | Line 1871: | ||
| http:// | http:// | ||
| - | Correct number is -21.71 | + | Correct number is -22.98 |
| Line 1609: | Line 1877: | ||
| '' | '' | ||
| - | for i=1 to 2;clcorp(i) = -21.71 - clcorp(i); | + | for i=1 to 2;clcorp(i) = -22.98 - clcorp(i); |
| '' | '' | ||
| + | |||
| ==== Apply the corrections ==== | ==== Apply the corrections ==== | ||
| Line 1636: | Line 1905: | ||
| timer 0\\ | timer 0\\ | ||
| antenna 0\\ | antenna 0\\ | ||
| - | uvrange 0,45\\ | + | uvrange 0\\ |
| docalib 1\\ | docalib 1\\ | ||
| gainuse 3\\ | gainuse 3\\ | ||
| Line 1665: | Line 1934: | ||
| ########################## | ########################## | ||
| + | |||
| ===== Work on just the target data now ===== | ===== Work on just the target data now ===== | ||
| Line 1675: | Line 1945: | ||
| '' | '' | ||
| task ' | task ' | ||
| - | getn 4\\ | + | getn 12\\ |
| - | source ' | + | source |
| timer 0\\ | timer 0\\ | ||
| bif 0\\ | bif 0\\ | ||
| Line 1687: | Line 1957: | ||
| aparm 0\\ | aparm 0\\ | ||
| go\\ | go\\ | ||
| - | getn 13\\ | + | getn 16\\ |
| go\\ | go\\ | ||
| clrmsg\\ | clrmsg\\ | ||
| Line 1730: | Line 2000: | ||
| '' | '' | ||
| task ' | task ' | ||
| - | getn 16\\ | + | getn 20\\ |
| - | get2n 17\\ | + | get2n 26\\ |
| go\\ | go\\ | ||
| pcat\\ | pcat\\ | ||
| Line 1738: | Line 2008: | ||
| < | < | ||
| - | AIPS 1: 18 101 3C129 | + | AIPS 1: 27 100 3C129 |
| </ | </ | ||
| + | |||
| ===== Imaging ===== | ===== Imaging ===== | ||
| Line 1750: | Line 2021: | ||
| '' | '' | ||
| task ' | task ' | ||
| - | getn 18\\ | + | default\\ |
| + | getn 27\\ | ||
| stokes ' | stokes ' | ||
| dopol 0\\ | dopol 0\\ | ||
| - | cellsize 0.25,0.25\\ | + | cellsize 0.15,0.15\\ |
| imsize 2048,2048\\ | imsize 2048,2048\\ | ||
| clr2n\\ | clr2n\\ | ||
| Line 1761: | Line 2033: | ||
| niter 20000\\ | niter 20000\\ | ||
| overlap 1\\ | overlap 1\\ | ||
| + | dotv 1\\ | ||
| go\\ | go\\ | ||
| clrmsg\\ | clrmsg\\ | ||
| Line 1773: | Line 2046: | ||
| clrmsg\\ | clrmsg\\ | ||
| '' | '' | ||
| + | |||
| + | |||
| ==== Check where the files went ==== | ==== Check where the files went ==== | ||