Planets, stars and nebula’s all emit radio waves, which are a form of invisible light waves. They are detectable with radio telescopes such as the dish telescopes at Westerbork and radio telescope LOFAR. But how do the researchers at ASTRON construct an image out of those invisible waves?

By Mischa Brendel

Published by the editorial team, 11 December 2019

Electromagnetic spectrum

 

All matter emits radio waves, but some matter does this at specific wavelengths. Hydrogen, for example, emits radio waves at 1420 MHz. Hydrogen also happens to be one of the most important building blocks in the universe. Stars are born from it. Therefore, measuring the amount of hydrogen in the universe teaches us a great deal about the formation of the universe. This makes radio waves one of the most invaluable resources for understanding our universe.

Radio waves are detectable with radio antennas. This can be done with the traditional dish antennas, like those at Westerbork. The 14 Westerbork parabolic dishes date back to the seventies, but are not as old as they seem: throughout the years the radio telescope has received several updates, of which the most recent in 2018. Each dish antenna carries at its center a receiver at which all the radio waves caught in the dish converge.


Westerbork Synthesis Radio Telescope (WSRT) credit: Astron

Radio waves can also be detected with telescopes like LOFAR, which operates in a different way. This radio telescope basically is a group of many telescopes spread out over several countries, in which each ‘telescope’ is a field full of radio antennas. The dish telescopes at Westerbork look at a single point in the universe simultaneously, a field full of LOFAR-antennas can look at multiple directions simultaneously.

With LOFAR each antenna is connected to its own receiver. Since the radio waves that are caught are very weak, radio telescopes have amplifiers to increase the signal strength. The signals measured are noise-like. However, the amplifiers themselves also add noise to the signal. So how to measure the proper signal and ignore the rest? This is where complicated calculations and computations come in, explains Dr Ir Albert-Jan Boonstra, R&D programme manager technical research at ASTRON. “The signal coming from space has a specific characteristic, while each radio telescope causes its own, unique noise signal. So, the signal which each telescope receives that is identical to the signal received by other telescopes must be the signal from space. We filter out the other noise-like signals.”


Low Frequency Array (LOFAR), with the LOFAR core on the left and antennes for the low frequencies on the right. Credit: Astron

The radio waves also need to arrive at the receiver simultaneously. All time differences must be corrected for, because in order to receive a strong enough signal so that an object can be properly charted, the received radio waves need to be coherently added up. Again, computational power is key.

By constantly taking measurements the telescopes produce tremendous amounts of data: for LOFAR this adds up to petabytes of data per day. Boonstra: “Ideally we’d store and process all of those data, but we cannot afford to do so. Therefore, we add up the signals from the antennas on a single field and only send through those accumulated data. This reduces the amount of data a hundredfold.”

A central system then correlates the data, after which incorrect data are removed or corrected. Subsequently the data are calibrated. “Then it is up to the astronomers to make proper astronomic charts out of these data,” says Boonstra.

A central system then calibrates the data: incorrect data are removed and corrected. Subsequently the data are correlated, which results in a correlation matrix. “Then it is up to the astronomers to make proper astronomic charts out of these data,” says Boonstra.

A lot of expertise comes into developing these radio telescopes. Not only in the field of astronomy, but also in the fields of antennas, electronics, algorithms, and scientific computing. ASTRON cannot outsource the development of all these systems, many are too specific and push the boundaries of current technologies. Therefore, it develops these systems in-house, but in close collaboration with other knowledge institutes and industry. And that makes ASTRON much more than just a research institute.

Sources
Related

Latest tweets

We've made a new video of our walking route the #Melkwegpad.
https://youtu.be/UBBH7rUJOk8 via @YouTube

Daily image of the week: DR1. The Apertif imaging team has released science data from the first year of science operations of WSRT-Apertif, which can now be accessed by the scientific community.
https://bit.ly/370W3Uf
#radioastronomy #DR1

In about half an hour, at 12.15, ASTRON researcher @AJBoonstra will be live in the Dutch radio programme 'Zoek het uit!' on @RTVDrenthe to answer some questions about the Westerbork synthesis radio telescope. You can tune in here: https://www.rtvdrenthe.nl/radio
#WSRT #radioastronomy

The latest Humans of ASTRON features Harish Vedantham, who was recently involved in the radio detection of a brown dwarf.
#humansofastron #radioastronomy #Elegast
https://bit.ly/2IPBguJ

searchtwitter-squarelinkedin-squarebarsyoutube-playinstagramfacebook-officialcrosschevron-right